Here are a few screen caps of a primary grade on the control room shoot. These are not the final look but rather an idea of the potential:
Monday, March 24, 2014
Control Room Shoot
We currently have two films in the works. "Those Who Watch" and "Sunflowers and Discomfort."
We spent the day on March 22nd shooting in the control room for Those Who Watch. The shoot was 9 AM to 7 PM. In doing so, we shot more than half of the final film which features two government officials conducting surveillance.
The dynamic range offered by the Blackmagic is essential to the successful execution of this shoot. The primary source of motivated light was the wall of monitors. We used LED's exclusively to mimic this soft diffused light and focused it on the actors faces as well as a number of backlights to provide for separation.
Another critical thing was being able to monitor focus. For this, we used the HDMI out on the Blackmagic to link to an external monitor.
We spent the day on March 22nd shooting in the control room for Those Who Watch. The shoot was 9 AM to 7 PM. In doing so, we shot more than half of the final film which features two government officials conducting surveillance.
The dynamic range offered by the Blackmagic is essential to the successful execution of this shoot. The primary source of motivated light was the wall of monitors. We used LED's exclusively to mimic this soft diffused light and focused it on the actors faces as well as a number of backlights to provide for separation.
The advanced LED kit gave us the extra throw needed to provide key lights for the actors faces. We used the light meter in the Field Production Kit to measure foot-candles. Nick Orris, the DP, also spent a lot of time pre rigging lights and planning setups which allowed us to conduct the shoot within our timeframe.
Some other interesting notes include the use of Black Aluminum foil as both barn doors for lights and a lens hood for the Blackmagic. We used our current one as well as a rental for the B-camera.
A couple other solutions included hiding lights at the base of the actors face for an extra fill light and even a table top tripod for lower light:
Marcus' lenses gave us the ability to overcome the limiting crop factor and get shots from the front.
Naturally, we slated all the shots for both organization and sound sync. As AD/Producer, Bryant kept things on schedule by following the setup schedule.
We ran two Lavlier mics on the actors and one shotgun mic on a boom as a backup. These were all mixed together through a mixer run by Nick Levy. The dedicated mixer has a stronger preamp and gives better sound that going right into a field recorder alone.
The Blackmagic eats tons of space in Raw. We had to rely on the ultra high speed 95 MB/s SD cards and transfer constantly. They were labeled and kept organized. They were ingested via an SD card slot right into the computers onboard SSD which provided for the quickest transfer speed.
And of course, craft services are very important.
Friday, March 7, 2014
Nick Staab - Resolve Assignment
Working with RAW has been far more challenging than I originally anticipated, yet through the challenges, I have already learned a lot, and we’ve barely dove into RAW workflow. One of the biggest challenges for me is the memory storage. Every frame is the equivalent of a RAW photo which can be around 10-20mb, so if you do the math, that mb add up quick and soon we’re counting gigs. This means a lot of memory cards, and constant swapping and dumping of the cards. Though what you get in return is worth the headache. Unlike DSLR’s where it crushes the blacks and it is hard to get back information from the picture, the RAW video files have an amazing amount of information so under the right circumstances, you can recover from a blown out window or a very dark room.
In the first clip i edited, i focused mainly on the glass door in the background, making sure I could achieve a balanced shot on both the inside and outside. I also warmed up the clip a bit and played with the mids to increase contrast. For the second, i more or less wanted to achieve the same goal. The overcast sky provided a great and very even exposure for all of our outside shots. Again, I warmed up the shot and increased the contrast to get a somewhat “rough” look.
Wednesday, March 5, 2014
Josh Puttbach - Resolve Assignment
Working with RAW has been a true learning experience, and has even shown how naïve I am when it comes to coloring video. I’ve worked with DSLR, and in the past have worked with color filters to achieve a desired effect for a scene or shot, but RAW is remarkable in that it stores every piece of information when you shoot video. In other words, every shade of red, green, and blue is picked up when shooting a scene. Of course lighting is a still a big factor (too much exposure can still ruin a picture) but it is amazing that you can fix problems with simple color corrections and make the shots match despite minor issues with lighting. The amount depth that Da Vinci offers is truly remarkable and you can spend hours just playing with coloring.
I chose two shots, and most people were interested in restoring the all of the color from the “flat” image that the black magic films in, but I wanted to achieve a more surreal feeling. In order to do that I made sure that Da Vinci read all of the levels of color that registered in the scene (light wave graphs) and essentially made sure that every level was even. I then created a new node, which is the equivalent of a mask in photoshop. The node allows you to play and get creative with a clip without destroying the “base” and allows you to build up to the desired look, and simply remove a node if a mistake is made, rather than starting from scratch. To achieve my look, I had about four nodes, and the second one I raised the red levels and brought down the green while leaving the blue at zero, giving the picture a much warmer look. The next nodes I basically messed with saturation and contrasting levels so that the greens became more golden, and some of the red became faded/pink. The aspects I discussed are just scraping the surface of Da Vinci’s software, and I haven’t even begun to tap into Da Vinci’s full potential, but I am of course looking forward to it during post production.
I chose two shots, and most people were interested in restoring the all of the color from the “flat” image that the black magic films in, but I wanted to achieve a more surreal feeling. In order to do that I made sure that Da Vinci read all of the levels of color that registered in the scene (light wave graphs) and essentially made sure that every level was even. I then created a new node, which is the equivalent of a mask in photoshop. The node allows you to play and get creative with a clip without destroying the “base” and allows you to build up to the desired look, and simply remove a node if a mistake is made, rather than starting from scratch. To achieve my look, I had about four nodes, and the second one I raised the red levels and brought down the green while leaving the blue at zero, giving the picture a much warmer look. The next nodes I basically messed with saturation and contrasting levels so that the greens became more golden, and some of the red became faded/pink. The aspects I discussed are just scraping the surface of Da Vinci’s software, and I haven’t even begun to tap into Da Vinci’s full potential, but I am of course looking forward to it during post production.
Andrew Thompson - Resolve Assignment
The RAW video coming off the camera is inherently flat, with all the extra color and light data stored in the files. In DaVinci, you can bring out this data and really take advantage of the additional 13 or stops of dynamic range. In grading these shots, I crushed the blacks and and brought highlights up. I shifted mid tones up as well to give a more filmic look. I also cranked saturation a bit.
The first shot's white balance was off; the image was too warm, so I cooled it down. Benefits of storing all color temperature data in the clip.
The first shot's white balance was off; the image was too warm, so I cooled it down. Benefits of storing all color temperature data in the clip.
Saturday, March 1, 2014
Nick Levy - Resolve Assignment:
In the two shots for color correction, the first thing I did after importing was bring the spectrum to the levels I wanted- the white and black levels to where I would like.
Shooting in RAW is pretty cool and does allow for interesting color manipulation and really forces me to evaluate the sequence more critically. That being said, the main thing with RAW that I noticed was the 'dulled' down color that it first present itself with. Everything looks grey and bland until you adjust the levels accordingly. To alter that, I brought the saturation up from 50 percent to 100. I noticed this really had an effect on the reds and greens, mostly because those were the prominent colors in the scenes. But even then, boosting the saturation does not solve all the problems, in fact depending on the scene, full saturation probably wouldn't be best (lots of contrasts) but it worked for this sequence.
The first sequence had a nice range of colors, a lot of green, blues and reds which actually helped because I would be able to see if there was an overtone of one color. Balancing the first one and getting the look and color I wanted was not hard, I only had about four nodes that I needed. I decided to keep the tones relatively even with other, that is I didn't want a red or pink tone to it, since there is a lot of brick for these shots, it was easy for the red to become over powering.
The second sequence is really the one that I had to focus on. With the majority oft he color being the red brick and varying degrees of red alongside Josh's red pants and green jacket really made contrasts and overtones a little too easy for the scene. I wanted to bring out the greens, especially for the last bit of it when the grass is seen, as well as his jacket to help separate him from the background. It was a little challenging, I had to use about six nodes to get the look I was going for. However, having the first sequence graded made it a lot easier, I was able to apply those effects to the second clip and make slight adjustments through out to tailor it for the new clip.
In all, the first sequence took a little bit of time to do, having the learning curve of the program, but once I was able to get a hold of it and saw the work flow it was fairly efficient. Color grading is somewhat enjoyable, though I noticed my eyes started to adjust to the colors after a few hours, the split does help combat that, but after a while one begins to lose the difference between up-teen shades of white.
Subscribe to:
Posts (Atom)




























